THE POUR LIST

The concrete work

Every line of work we pour, with the bands, the specs and the finishes that fit. Bring the picture in your head; leave with a number.

New pale concrete driveway from above, saw-cut joints and dawn shadows

Driveways & crossings

from $8,900

Broom, exposed or coloured. Tear-out, disposal and council falls included in the written quote.

Tear-out to broom finish in four days on most single driveways. Crossings and aprons formed to the falls the council wants, joints cut the same day, sealer scheduled before we leave.

Price this work

Timber formwork and steel mesh set out over compacted base before a pour

Slabs & foundations

from $4,200

Shed bases, garage slabs, footings. Engineered mixes, mesh and rebar where the loads say so.

Slabs carry buildings, so slabs get engineering. Compacted base, membrane, chaired steel and a laser-checked surface, with the mix and cover written into the quote.

Price this work

Burnished concrete floor with faint trowel arcs

Polished & burnished floors

from $6.50 / sq ft

Interior floors cut and polished, or burnished for sheds and shops that work hard.

Cut, ground and finished in-house. Matte, satin or burnished, densified and sealed for shops that take forklifts and kitchens that take feet.

Price this work

Burnished concrete patio panels at golden hour

Exposed aggregate

from $11,400

Riverstone mixes washed and sealed matte. The finish people point at from the street.

Local riverstone blends poured, washed and sealed matte. Samples poured every winter; pick from slabs you can stand on, not brochures.

Price this work

The finish library

Every mix we pour, as poured samples. Sealed halves shown where sealing changes the colour, because it does.

Exposed aggregate concrete sample, river pebbles half sealed — Riverstone Exposed
10 MM RIVER PEBBLE · SEALED MATTE
Driveways, paths, pool surrounds

Pale broom-finished concrete sample with fine parallel lines — Bonefield Broom
FINE BROOM · ANTI-SLIP
Driveways, crossings, ramps

Burnished concrete sample with soft matte sheen and trowel arcs — Slate Burnish
STEEL-TROWEL BURNISH · SOFT SHEEN
Patios, sheds, interiors

Integrally coloured concrete sample in warm umber oxide — Ashline Oxide
INTEGRAL UMBER OXIDE · MATTE SEAL
Feature slabs, entries

Price a finish

Spec questions, straight answers

What mix goes into a driveway?OPEN

A 32 MPa (4,600 PSI) engineered mix on driveways and slabs. Colder-climate pours get air entrainment so freeze and thaw cycles do not eat the surface.

Mesh or rebar?OPEN

Steel mesh in every driveway, chaired mid-slab so it works. Rebar where loads concentrate: footings, thickened edges, truck aprons. It is in the quote by name.

How do you handle drainage?OPEN

Falls are set in the formwork, not promised afterwards. Where water has nowhere to go we cut in channel drains and show them on the joint map.

When do you cut the joints?OPEN

Same day as the pour or first thing next morning, before the slab picks its own line. The joint map is part of your handover pack.